Company Brief: Established in 2003, Zhongyuan Machinery Factory is an experienced Chinese manufacturer of metal forming machinery. We offer a vast range of products, including a sandwich panel forming machine, metal tile forming machine, metal roof forming machine, deck roll forming machine, C & Z purlin forming machine, guardrail roll forming machine, slitting machine, cut to length machine, and more. We also supply steel coils, EPS sandwich panels...
Home » Products » Steel Structure Machine » Shot Blasting Machine
Shot Blasting Machine

Shot Blasting Machine

Features
The shot blasting machine is used to purge the surface rust of welded component, H-shaped billet bar, box iron, angle iron, steel plate, etc. After the treatment by rotoblast, the surface of structure is optimized and accordingly the antirust property is improved.

Technical Specifications of the Shot Blasting Machine
1. Suitable specifications of work piece
1) Steel: Width ≤1600mm
     Thickness 6-30mm
     Length ≥3000mm
2) Section steel: Max section size (width ×height) ≤800×1600mm
    Steel tube, angle steel, groove, "I "shaped steel and H Beam: Length ≥3000mm
    Steel structure: max section size (width ×height) ≤800×1600mm
    Length ≥3000mm (work piece that could be running on the conveyor)
2. Steel piece and the rotorblasting quality grade:
The rotorblast side reaches ISO850-1: 1988 A-B Sa2-Sa2.5 grade
3. Work piece processing speed: Double way running and stepless speed converting V=0.6-3.0m/min
4. Rotor blast material: High strength steel rotor, with hardness of ≥45HRC
Rotor size: Φ1.5mm, the rotor could also be put in a steel silk rotor, rhombic rotor, but the participation quantity shall not exceed 20% of the whole quantity.
5. The total capacity of the rotorblast room is about 118kW.
6. The electrical power condition is 380V/3phase/50HZ or as per customer's requirement.

Other Products
    2. Shutter Door Roll Forming Machine The shutter doors produced by the shutter door roll forming machine are used as product from the roll forming machines is used for shutter doors of buildings. The...
    2. Crimping Forming Machine The crimping forming machine consists of feeding rollers, crimping device, hydraulic station, and PLC controller.
      The product from the crimping forming machine is used for...
    2. Embossing Machine Suitable material : Pre-painted galvanized steel or galvanized steel
      Width of raw material : 1250mm (other width is available)
      Thickness of raw material ...
    2. Cut To Length Line Suitable raw material for the cut to length line is cold rolled steel.
      The raw material yield strength is σs≤ 250 Mpa.
      The raw material tensile strength is σb≤500 Mpa ...

Zhongyuan is a professional shot blasting machine manufacturer based in China. Apart from steel structure machine, we offer sandwich panel machine, metal roll forming machine, pre-painted steel coil, corrugated sheet, and more.